Is A DIY Router Right For You? Here's What You Need To Know

Add BGR on Google:
Google Discover

So you've seen the various news stories of routers being banned, like some models from TP-Link, or you've read about the many different vulnerabilities impacting seemingly everything. On top of this, the router that you've been using isn't cutting it anymore, with slow speeds and not enough coverage. Rather than leaving the job to someone else again, why not build your own router this time around? DIY routers have been around forever, and they run on specialized operating systems that can turn a regular PC into a fully functional router for your network. The only thing that might stop you is the fact that the entire project can get quite technical.

Choosing to go down this path requires a little effort and the basic ability to follow instructions. There are thousands of tutorials available for whichever option you choose. That said, you'll need to keep in mind that maintaining your DIY router will be entirely on you. Huge vulnerabilities are being uncovered now that everyone has access to the equivalent of an electron microscope for backdoor-finding in the form of LLMs. If you don't keep on top of updates or follow potential issues, your entire network could become a critical failure point.

Some internet service providers (ISPs) will still require you to use their modem as a way to access the service. If you have a router that combines the modem, you may either need to get a separate modem installed, or look into turning on bridge mode or a similar setting like IP passthrough. Always make sure to check that your router is supported before starting.

DIY routers are incredibly flexible

If you're okay with the drawbacks, building your own router can have massive benefits. Routers supplied by the ISP are often cheap junk that shouldn't be at the heart of your network for too long. There are better off-the-shelf routers available in almost any major store, and you shouldn't settle for less. By going DIY, you'll potentially get faster speeds, as you're providing the inbound connection at full throttle off the back of whatever device you chose, rather than a dinky little processor inside a cheap router.

Depending on what you build off of, you'll find it endlessly customizable. Old motherboards are a great base, and you don't need cutting-edge hardware to do it. In a recent Gamers Nexus video on DIY routers, the team used an Intel 4th generation chip with 32 GB of DDR3 RAM. Entirely overkill, but the exposed PCIe slots allowed for greater expansion of capabilities. Some opt for mini PCs, or even tinkering-focused boards like the Raspberry Pi or LattePanda Mu.

Again, you should be prepared to tinker and fiddle with the DIY router as it provides your network. These can be drop-in replacements, and can even act as extenders if needed, becoming wireless access points. If this is the use case, it might be worth looking into modifying an older router instead.

Recommended